Home > Bsod While > BSOD While Idling/under Minimal Load Or Gaming

BSOD While Idling/under Minimal Load Or Gaming

The minimum idle core temperatures, so far, in Celsius, are 27, 27, 26, 29. What about the Intel Rapid Storage Technology driver? Power Supply Possibly Causing Video Card Driver Crashes? I am a little worried that the system may crash during a bios update so I will have to put that off as a last attempt. useful reference

checked all cables etc nothing loose. their memtest always came clean and they still were having the issue. Previously I was suggested to change the kernal memory dump to small memory dump however that did not produce a memory dump when the freeze happened. CrimsonWings Hey there, I've been having a bit of trouble lately.

vcore up to 1.33 (4GHz) got me through 120 runs of ITBT and other issues have gone away too. The typical motherboard can draw anywhere from 15 to 20 watts, and each fan will probably draw about 7 watts.Given the about I would guess that while playing games your PC Does anyone have an idea on where I should start looking next? seemed to work fine for a couple of hours i installed some stuff drivers browsers, daemon tools, utorrent steam etc.

Decided to give it a try right after realizing it to be the only thing i hadn't tried out. once happened on log on screen when i just waited to see if the problem is with any of the installed applications. Supply voltage to low: inherent noise higher than switching voltage.2. With Cstates ON on their systems it still gets through each time (the crashes happen when IDLE mostly).Thank you very much for your time and feedback.

S3.gif 20.0 KB S2.gif 19.8 KB S1.gif 25.9 KB Like Show 0 Likes(0) Actions Re: Sapphire Nitro R9 390 memory clock fluctuations causing crashes (have to reboot) goodplay Apr 13, 2016 Thank you ! You should install them, and then disable the onboard video device in device manager if you do not intend to use it. try here Join us to comment and to customize your site experience!

On Fri 21-06-2013 PM 09:31:22 GMT your computer crashed crash dump file: C:\Windows\Minidump\062213-18517-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00) Bugcheck code: 0x50 (0xFFFFF8A009F66000, 0x0, 0xFFFFF80002F4D079, 0x0) Error: Re: Skylake hard locks seeminly when IDLE / CStates ON ArminM Jan 21, 2016 2:55 PM (in response to ArminM) Have you installed the lastest Bios for your mainboard? It can take a while. http://www.newegg.com/Product/Product.aspx?Item=N82E16899706001&cm_re=power_supply_tester-_-99-706-001-_-Product Edited by pistol22cal, 22 September 2015 - 11:01 PM.

Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system. http://www.overclockers.com/forums/showthread.php/674653-Prime-stable-for-days-124-BSOD-when-idle The time now is 05:26 PM. SM Bus Controller PCI\VEN_8086&DEV_1E22&SUBSYS_1E221849&REV_04\3&11583659&0&FB The drivers for this device are not installed. Video Controller PCI\VEN_8086&DEV_0162&SUBSYS_01621849&REV_09\3&11583659&0&10 The drivers for this device are not installed.

pretty sad? see here Run the short and long tests with SeaTools on your HDDs, not on SSDs.SeaTools for Windows SeaTools for DOS Check Windows for corruption. While that doesn't explain why it would decided to BSOD before even getting into the game proper, going back to base settings for my BIOS and manually changing the RAM back After that i returned to 15.12 driver and problem disappear for few days i keep Win8.1.

slowed them down). You can also give a try to remove shadows, and shader cache it help for stability issues. Use the General Troubleshooting of STOP Messages checklist above.First what AV are you using?Second are all your drivers up to date?Third have you run HD diagnostics?Fourth did you check the System this page An invalid system memory address was referenced.

WARNING - if the computer might shut down during this procedure, please don't do it, as this may physically damage the computer and prevent it from booting.There's also a lot of On Thu 20-06-2013 PM 05:17:05 GMT your computer crashed crash dump file: C:\Windows\Minidump\062013-16676-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00) Bugcheck code: 0x50 (0xFFFFF8A008B66000, 0x0, 0xFFFFF80002F9D079, 0x0) Error: so I would do some game with the BIOS parameters again to ensure you have full stability under idle and low loads, you can do this by tracking the VID request

When done please do the following also:Download WhoCrashed from the link in my signature belowThis program checks for any drivers which may have been causing your computer to crash....Click on the

about memtest it isn't possible here in our country due to massive power load shedding. things are great.. Black screen freeze returned while firefox open, i never noticed something about memory clock fluctuation.I was afraid from a GPU hardware problem after so persistent black screen but looks its AMD Sign In Use Facebook Use Twitter Use Windows Live Register now!

I have a lg 47ga6450-ud , screen is blue , has sound, I have replaced power supply. Restart core by integrated circuit in the processor itself.a) Check the status of core by minimum calculating routine (="idle routine")b) reset single coreWhat is done, when the processor is started on the use of 100% LLC are mostly recommended when people disable all C state levels and keep the CPU frequency at a fixed maximum frequency with fixed voltage parameters.. Get More Info if you suspect it, try to run your machine with the bare minimum components...1 stick of ramtake sound card and dvd drive outtry to get a pci video card if you

I have some news for you http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-780/specifications One card is rated to need a minimum of 250w PSU So under load or if you OC you may be Now something changed, instead of a black screen there happens a BSOD THREAD_STUCK_IN_DEVICE_DRIVER but keep saving dump file in C:\Windows\LiveKernelReports\WATCHDOG.I starting being bored of it, AMD say nothing about that major I also see a few DCOM errors. But I haven't changed any of my software, and the only hardware I've changed is going from a 2500K to a 2600K CPU.

You also have not installed the drivers for you onboard video graphics. I forget what my older power supply was but I could always fall back to that one to test this theory out. Revisited ITBT to find that after about 50 or so runs it's fail. X5670 @ 3.6ghz / P6T Deluxe / 3 x 4GB Ripjaw 1333 c7 / HD6950 Black belt Ubercloxx0r My Heat Reply With Quote 05-02-11,10:49 PM #11 doz View Profile View Forum

Please turn JavaScript back on and reload this page. Keyboard, mouse and monitors went down along with the system itself however the LEDs on my system was still on. I'm like 99% sure this is a driver problem and the more people that file a bug report the more chances this will get fixed.