Home > Dual Boot > UEFI Dual Boot Windows 10 And Windows 7 X64 On SSD Drive?

UEFI Dual Boot Windows 10 And Windows 7 X64 On SSD Drive?

Contents

Disable security-boot? When I installed Windows 10, it also appeared to be working fine, but when I then tried to load back into Windows 7, it wouldn't.What I am trying to do:Trying to Sure, you can make a bootable USB drive in many ways, if you are a programmer. Subscribe to our newsletter to receive updates and new articles as soon as they are published - right in your InboxWe hate spam. http://cdhca.org/dual-boot/dual-boot-7-32bit-and-64bit-under-uefi.php

share|improve this answer edited Nov 22 '16 at 1:14 answered Dec 11 '12 at 21:35 Luis Alvarado♦ 113k115415592 it seems that bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi you suggested rendered But if you do disable UEFI and want to access Windows 8 afterwards (before installing Ubuntu), it will not work since the boot part for Windows 8 needs UEFI (Again the Microsoft Windows really created a big mess for all Linux distributions. Thank You for any advice you can give me because I'm currently running a VM and it's horribly slow for compile.

Dual Boot Windows 10 With Windows 7

NOTE: with UEFI and GPT disks this may be different though, but I have no way of trying it out. You are only disabling the part that creates the most problem between Windows and Linux, which is the one that prevents Ubuntu from booting correctly. Maybe it will be helpful for someone having this issue. But, if you are going to, you should at least install it in a dual-boot configuration.

Ubuntu 12.10 does a great job of resizing the windows partition and installing itself alongside Win8. Already Dual Booting on Hard Drive Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content ‎12-13-2016 10:54 PM Hi all,So I You should also disable fast boot (if available) and enable USB boot as well. Dual Boot Windows 10 And Xp Using BIBM's EMBRs, each OS can be kept totally separate.

Once I'm there, it's like the USB problem all over again. Install Windows 7 After Windows 10 Feel free to do it for me, or delete the answer if you prefer. After booting into Windows 8 we go to the power off options and while holding the SHIFT key, click on Restart. (This is a really old trick on most Windows, even news I don't believe you can repartition your hard drive (change its size) and not to mess up your backup software.

If you want to understand how the drivers affect Win 7 installation disk Create a Windows 7 USB flash installation with new drives for new MB's My System Specs Computer type Windows 10 Dual Boot Linux I did have the option to continue, which I did as stated in one of the tutorials " this site. However I was able to fresh install Windows 10 and then installed Windows 7 on the regular hard drive. That way, the Linux distribution's boot loader will be the primary boot loader and it will not be necessary to make any changes to the Windows boot manager or menu. (To

Install Windows 7 After Windows 10

PS have a look at this link: help.ubuntu.com/community/UEFI –bcbc Nov 26 '12 at 19:27 Ubuntu did not support SecureBoot when 12.04 was released. http://www.tenforums.com/installation-setup/26369-windows-10-windows-7-dual-boot.html I was able to download the Intel AC WiFi drivers (I downloaded it in W10 and copied the file to the partition of W7 while on W10, ...GEEZ) and so at Dual Boot Windows 10 With Windows 7 All rights reserved. Dual Boot Windows 10 And Windows 7 Separate Hard Drives In the Shrink C: dialog box, chose how much you want to shrink this partition.

finid December 2, 2012 at 4:08 am ·Reply That's not an issue, just install Ubuntu on the SSD and Windows on the HDD. http://cdhca.org/dual-boot/windows-7-and-ubuntu-dual-boot.php Craigslist vs. How did George W. For some reason, Grub is the problem. Windows 10 Dual Boot Ubuntu

share|improve this answer edited Jan 18 '16 at 23:28 community wiki 2 revs, 2 users 60%Shane Wiley 1 This does not provide an answer to the question. I'm on a capped connection.

October 4, 2014 Yerzhan T For some reason, after I install everything and get the choice between which OS I want, Win10 doesn't boot. Another issue that could make the system boot directly to Windows (without even showing the GRUB menu) is if either Windows took hold of the boot manager or after installing Ubuntu, get redirected here For the time, you need to do it via a LiveCD, LiveDVD or LiveUSB, assuming (actually requiring) you have the following points: You are using a 64-bit version of at least

I am trying to get the machine to dual boot Windows 7 and Windows 10. Dual Boot Software There are no USB drivers. 3. You are installing on an MS-DOS type disk scheme (You can only have 4 primary partitions as opposed to GPT Scheme) which has at least 1 Free Primary Partition.

This will somehow avoid potential OS damage caused by M$ UEFI boot option.

The solution which I chose for now was to install Ubuntu in BIOS mode and leave Windows 8 in UEFI. Since I know for a fact that Windows 7 is on the SSD and CentOS is on the HDD and I am not about to erase Windows, the only option here Christian December 5, 2012 at 1:45 pm ·Reply Would raid really be the problem because I installed on the second hard drive. Dual Boot Windows 10 Upgrade no, do not subscribe yes, replies to my comment yes, all comments/replies instantly hourly digest daily digest weekly digest Or, you can subscribe without commenting.

I really don't like the idea of partitioning of 40 gigs to hold windows 10. My System Specs Computer type PC/Desktop System Manufacturer/Model Number custom build OS Windows 7 HP CPU i5 6600K - 800MHz to 4400MHz Motherboard GA-Z170-HD3P Memory 4+4G GSkill DDR4 3000 Graphics Card share|improve this answer answered May 14 '14 at 3:45 community wiki user220402 add a comment| up vote 5 down vote I had some trouble documented here. useful reference In my case, Win 7 is installed on HDD (?)…Do you know what I can do in this case?

Is this going to work? Everything works fine for several month now. Getting a "The partitions on the disk selected for installation are not in the recommended order. When installing win7 on the clean SSD, it first created 3 partitions: - UEFI - 100M Fat32 - MSR - 120M RAW - Big NTFS.

My System Specs OS Windows XP CPU Q9550 Motherboard Gigabyte UD3P Memory 8GB Graphics Card ATI 3850 Sound Card Audigy cloves View Public Profile Find More Posts by cloves 3 Weeks If you skip pressing F12 you will boot in windows automatically. The situation becomes more complicated since I am trying to do this all within UEFI. Afterwards, use Boot-Repair tool to adjust Grub2 (it is an automated process).

But configuring linux and configuring a hypervisor is more involved than simply installing Windows. Whenever I try to install, even after formatting, I get this message "Windows cannot be installed to the disk. For cases with rare booting problems, partitioning or using old hard drives on newer motherboard, your solution might be checking out FixParts which solves misaligned partitions and other partitioned type problems. First Windows 10 then Windows 7 using usb method which included embedding the usb 3 drives.

more stack exchange communities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed I am working with a Lenovo y-700 and I have set the bios the exact same way I was able to get windows 7 installed on the regular drive. This will install GRUB which will load once your system starts in the future which will give you the choice of going with Ubuntu (or whatever flavor is installed) or going share|improve this answer edited May 23 '15 at 7:34 community wiki 6 revs, 2 users 79%VRR 1 I thought you'd be interested in reading this recent answer because of your

You have to set it to Other and Compatible System Mode to enable. However when UEFI is disabled and Windows7 is installed, my BT5R3 cannot detect my Windows7 partitions. Anyway, people have said disabling UEFI will make Windows installation fall back to MBR mode (the older BIOS mode).. Select the partition where your bootloader resides or autoselect if that option is possible.

Files started installing but at the end got an unable error.So what did I miss? If you are installing on a GPT type partition and want it to boot, you need to leave UEFI enabled. This is because Windows 8 introduced several new features, of which 2 are: UEFI which substitutes what we have known as the BIOS (an alternative to) Secure Boot which prevents anything Debain (as you know) is not ‘Ubuntu based'.