Reply Jim says: December 30, 2008 at 5:08 pmI had a hard drive fail by not spinning up. Report • #9 OtheHill February 7, 2014 at 21:34:58 ✔ Best AnswerIf you only have SATA I native support then yes, that could be an issue. if i turned on auto detect it doesn't seem to boot up. Some motherboards offer a completely separate set of SATA connectors for RAID arrays (see hard drive performance). check over here
My boss thinks the computer is just slow, but I think this is a sign of a much bigger problem. Solution for me was re-arrangaing power distribution. So i have at least 2 copies of everything. The black has 64MB of cache while the blue has only 16MB. useful reference
All Rights Reserved Tom's Hardware Guide ™ Ad choices Search Sign Up Log In Home Forum How To Download News Encyclopedia High-Tech Health Sign Up Language English Español Deutsch Français Italiano If the key stroke required to enter CMOS Setup isn't displayed on the screen as the PC begins to boot, you'll need to look it up in the documentation or on Before I changed my GPU on my previous rig, I changed my PSU first, cause I worry the power may not be sufficient for that GPU. After a half hour of warming up, restart the computer and the drive spun up and was readable.
Report • #2 matvangogh February 6, 2014 at 16:35:50 My computer is not custom built. be sure the sata wires are in order, there are sata ports on the MB which are numbered , be sure to put port #1 for the OS drive then it The lower one, which SCROLLS, also shows you other devices Windows does not yet understand. Installed A New Hard Drive Now Computer Won't Turn On Although SATA capable boards DO have channel designation, there is no need to put then in any specific order, I too am having the same problem, but my computer will load
Reply Maggie Clarke, Ph.D. This is either a software problem or the beginnings of a harddrive fail.One of the warning signs or an imminent fail is slow operation and odd noises from the drive. Any idea Please help thank you. More Help Yükleniyor...
says: May 18, 2009 at 1:01 pmAnd since I wrote the above comment, one of the brand new two 1 TB seagate external backup drives failed! Windows 7 Won't Boot With Second Hard Drive Thank you for helping us maintain CNET's great community. That hard drive will no longer boot unless you perform a repair. i tried everything, different sata ports, even a USB adapter, resetting cmos, hooked it up to my wifes pc, NOTHING when i hold it in my hand i can feel and
Yükleniyor... At first, no luck. Windows Won't Boot With Second Hard Drive The black should work if it is not defective. Computer Won't Power On With Hard Drive Plugged In Flag Permalink Reply This was helpful (0) Collapse - You saved my life too by wademeister / March 30, 2011 12:41 AM PDT In reply to: Create a system partition on
Get it from the second link below.http://windows.microsoft.com/en-us/...http://www.piriform.com/ccleaner/bu... All Rights ReservedAd Choices The information on Computing.Net is the opinions of its users. be sure the sata wires are in order, there are sata ports on the MB which are numbered , be sure to put port #1 for the OS drive then it http://cdhca.org/hard-drive/install-windows-7-with-sata-hard-drive-and-ide-dvd-rom-drive.php PRESTONCOLLEGETV 137.987 görüntüleme 1:43 Repair A Corrupt Harddisk (Really-works) - Süre: 4:00.
Nvidia 8800GTS CardI keep getting Blue Screens of Death ever since I built it.They happen 1 to 3 times a day when I'm using the PC for many different things. Windows Won't Boot Without Second Hard Drive It did allow me to install windows & on the newer 1tb drive. Everything works with my SSD alone but nothing works with my HDD attached..
This Inrush current could trigger the PSU to shut down. "Good" PSU with 500 Watts would be NO Problem for your system. Flag Permalink Reply This was helpful (9) Collapse - You saved my life by evertith / March 14, 2011 1:13 PM PDT In reply to: Create a system partition on your Also contributing to this is that I recently bought a new graphics cards. You Want To Install An Ssd Drive In Your Desktop Computer But The Drive Is Far Too Narrow To Fit Figure 8.30 227 Page 1 of 7 Next > + Share This 🔖 Save To Your Account Related Resources Store Articles Blogs My iPad for Seniors, 4th Edition By Michael Miller
If you do get a message warning of impending drive failure from the operating system or from the motherboard BIOS, it pays to back up your data and just replace the It attempts to and after a while of loading up a blue screen flashes and it restarts itself, and this loop continues. Boot up error 1962, no operating system found. have a peek at these guys The most common cable failure is right at the connectors, which can break open if the locks fail.
Sorry, there was a problem flagging this post. Report • #15 matvangogh February 8, 2014 at 08:09:29 thanks .how long is the speed difference booting up between fast boot off or on? I use Speccy (hw monitor equivalent), so I'll try the test you recommended.Thank you for all your help! If so, first make sure you have some up to date antivirus software on it, then pull both disks from the Gateway, and connect them in the uninfected PC.
If the drive gets too hot, try repositioning it in the case so it can receive greater air flow, or add a case fan to the front of the case. The best way to verify is to use a antivirus boot disc to scan and repair your PC. or buy 2 of the same size and use a Mirroring Raid array Thanks againmessage edited by matvangogh Report • #21 OtheHill February 9, 2014 at 09:49:47 One more time. solved OCZ Agility 3 Disconnecting from mobo and requires cold boot after "failed to locate boot drive" error on restart SATA shows up in CD boot priority but not in Hard
According to the HP website, this motherboard has: Six SATA connectors: o Supports 1 SATA-150 or SATA-300 disk drive on each SATA connector o Speed up to 1.5 Gb/sec or 3.0 What do I do next? Good Luck Ask a question Member requests are more likely to be responded to. Select “Properties” and then navigate to the “Tools” tab.
Copy and paste the address below into your browser address box.ftp://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_xps_desktop/xps-420_owner%27s%20manual_en-us.pdfmessage edited by OtheHill Report • #20 matvangogh February 9, 2014 at 09:09:31 I dont understand the default setting in the Flag Permalink Reply This was helpful (0) Collapse - The answer is by R. SATA is enabled in my BIOS. Reply Tom says: November 8, 2016 at 4:44 amI was looking for why data is not accessible by user.
Help Is Available In Our Community Malware Removal ForumNew Posts How capacitors on motherboards and other components work What is TCP/IP and how does it work? Reply Catalin says: May 31, 2010 at 1:29 amAlso my laptop was working fine….. Everything in BIOS was good. i was about to throw this drive out and buy a new one.
Thanks for sharing!we've written an article on a similar topic here - please feel free to use the info in our article.http://www.castlecomputers.uk.net/blog/tips-to-recover-data-from-a-crashed-hard-drive/ Reply Mike Manicek says: August 14, 2015 at 11:22