Home > Windows 10 > Authentec Finger Print Doesn't "read" Problem

Authentec Finger Print Doesn't "read" Problem


Change to the Security page, and then select the Fingerprint item 4. Press F1 to enter BIOS Setup 3. You mentionedthat you are having a problem with the Fingerprint Scanner.I would be happy to assist you. Ubuntu is a registered trademark of Canonical Ltd. http://cdhca.org/windows-10/print-queue-question.php

Of course the "older sensor" was supported in Windows 8.1 and Windows 8.0. Active capacitance sensors apply a tiny voltage to your skin before taking these measurements; they’re often used in touch scanners rather than swipe scanners, and they’re more expensive. I tried to disable Windows Hello (by removing the PIN and fingerprints), but it appears that once it senses that there are fingerprints registered with the TP Fingerprint Software (v 6.0), Under the Windows Hello section, find the fingerprint item and click on the “Set up” button. http://www.sevenforums.com/drivers/23645-authentec-finger-print-doesnt-read-problem.html

Lenovo Fingerprint Software Windows 10

Learn How to Post and More  Community News  Best of the Community Blog  Notebooks Notebook Operating System and Recovery  Notebook Boot and Lockup  Notebook Wireless and Networking  Notebook Audio  Notebook Video, Unfortunately there's no infobox, if login by fingerprint fails, but it works well. 30-Dec-2008,00:42 #8 davidsunvalley View Profile View Forum Posts View Blog Entries View Articles Banned Join Date Dec 2008 Now you can have fun unlocking your screen, logging out and in, sudo-ing and running things with root privileges, using your fingerprints (or toeprints, should you choose to register one) –of EmeraldAvenger I work on behalf of HPPlease click “Accept as Solution ” on the post that solves your issue to help others find the solution.Click the Thumbs Up on the left

how are this function? The full model name is DM4-1160US.I uninstalled HP Simplepass.Rebooted.Installed the file you linked.Received this error message during installation:AppHelp dialog canceled thus preventing the application from starting.C:\SWSetup\SP71729\x64\HP SimplePass.msiSo now I have no The link is in my earlier comment, 3 above yours. How To Enable Windows Biometric Framework Windows 10 Can I still use the same .reg file?Anyway, I just try to execute the .reg and button is still grey off.

After the reboot, log into Windows using your Windows password. Lenovo Fingerprint Manager If you have a typed password, they can't. 0 Anonymous Feb 20, 2008, 3:27 AM Beware, this is the first few steps before the "mark of the beast". It just doesn't let me log into the PC. http://newwikipost.org/topic/uYqCjXFcUPGREZlewnI85vqBFovprkbW/Finger-print-doesn-t-work-after-upgrading-to-windows-10.html Do I have to install Fingerprint Manager Pro to get it working like this?Thank you.

If the fingerprint reader doesn’t recognize you when it should (false rejection) it’s irritating, but you can scan your finger again or use your password. Authentec Truesuite Windows 10 Download My system has 2 fingers enrolled, and I also have preboot authentication where I use my fingerprint to enter the BIOS Power-On password. Scroll down to Lenovo Fingerprint Manager Pro and then click on "Uninstall/Change". fakhrulhilal What's DOS?

Lenovo Fingerprint Manager

When you put your finger onto the sensor, it can measure the difference in charge between the ridges of your fingerprint (which are all skin) and the valleys between the ridges Sounds ridiculous. 0 Anonymous Feb 21, 2008, 6:07 PM i agree with PixelPusher220, in the future when fingerprint is used as password to almost everything, e-mail or banking, etc. Lenovo Fingerprint Software Windows 10 It's as if it scans, registers as a valid fingerprint, but wont actually log me in.I've read the other threads and I have no access to Group Policy settings (doesn't exist Windows 10 Fingerprint Driver I have Lenovo X240, and I did a fresh install of Windows 10 Pro x64.Per this guide, I did not install the Fingerprint Manager Pro, since I have Synaptics Fingerprint device.In

Fingerprint light is green, but nothing hapens when i try tu use it...I have the good finger print driver1.6.2.352 (i don't have to uprgrade it, it was ok)I have the good http://cdhca.org/windows-10/autohide-doesn-t-deactivate.php Then fprint_demo is able to recognize fingerprints, but the when you login or do something else where a password is needed there's no prompt to enroll a finger. 16-Nov-2008,09:54 #6 cygnuslodge If I shutdown afterwards, it is very likely that the power-on finger scanning will work the next time, but it is not always the case. I've had installed two drivers the libfprint stuff and the the thinkfinger driver. Lenovo Fingerprint Reader Not Working

WildGustav What's DOS? I have uninstalled Lenovo Fingerprint Pro Manager by following the step 1-4 as adviced by this article2. Then I slide down and rotate the fingertip a bit more towards the scanner and a bit into the notch. 11-Nov-2008,00:48 #5 wovnoeins View Profile View Forum Posts View Blog Entries click site Right click on the Fingerprint Sensor5.

I went to download Lenovo Settings from the Windows store and had to create a windows account for authention. Authentec Fingerprint Software Windows 10 Follow the on-screen prompts to create your PIN. When I upgraded to windows 10, without clearing fingerprint data in BIOS, I still can use it.

I follow the instruction below for windows 10 (windows hello and power-on password) Fingerprint works fine, but only after push start button.

Yes not suprising. Skoop Bit Torrent Options Mark as Read Mark as New Bookmark Highlight Print Email to a Friend Report Inappropriate Content on ‎08-02-2015 07:38 AM What's the relationship between a driver of I have problem locating "Windows Hello" in step 15. Cannot Communicate With Sensor Fingerprint Lenovo it works...I don't know why, but all is ok now.Thank you to evrybody on this forum !

Quality is not great on those cheap ones. You will have to register before you can post in the forums. (Be aware the forums do not accept user names with a dash "-") Also, logging in lets you avoid Do not use Windows Hello to enroll fingerprints. http://cdhca.org/windows-10/pc-doesn-t-reactivate-the-screen.php tangoo Fanfold Paper Options Mark as Read Mark as New Bookmark Highlight Print Email to a Friend Report Inappropriate Content ‎08-12-2015 12:32 PM - edited ‎08-13-2015 08:03 PM Deleted by author

In my case, it helped to get it back working. If you’re worried about protecting your information if your PC is stolen, you need to add extra security by using whole-disk encryption software like PGP or BitLocker that makes the drive Maybe I'll even test it out on my old T60, or T41, or T43... Reply 0 0 « Message Listing « Previous Topic Next Topic » Related Documents HP Notebook PCs - Reducing Heat Inside the PC to Prevent OverheatingComputer Does Not Start and the

It includes the driver that works on Win10. It why i unstalled the software... This is not working in Windows 10.Is there a way to make it work? OS: OS: Windows 7 Pro 64 preinstalled through downgrade rights in Windows 8.1 Pro I was trying to follow the steps to make my Fingerprint working again in Windows 10.

Once set and password entered via that process. You’ll also need to wipe the sensor clean from time to time (or press on a piece of adhesive tape then peel it off). TIA, Ron. But the option is on the lock screen.So basically the hardware is working, I can use the fingerprint scanner to log into webpages and into the simplepass no problem.