Home > Windows 7 > Windows 7 Safe Mode Reboots At Classpnp.sys

Windows 7 Safe Mode Reboots At Classpnp.sys

Although none of this helps with getting fallout 3 to install any easier. So what was my problem? After a few minutes you should boot into Windows normally with no problems. This may allow you to boot from the CD/DVD and therefore run the Startup Repair tools like memory diagnostic. weblink

Affected Systems The above symptom is associated with, but not limited to, the following systems: ThinkStation P500, P700, P900 System is configured with Microsoft Windows 7 Operating System Operating Systems Microsoft After 2 runs of repair I got into login screen and was able to login again. At 2016-11-23 08:00:00, Sumo left the following comment ...Amazing, This worked with my Toshiba laptop as well. It has worked for several people, so it's worth a shot. http://www.sevenforums.com/bsod-help-support/141151-windows-7-safe-mode-reboots-classpnp-sys.html

Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. With no other option available, I did a hard reset. I and it worked. Nor sure if having the battery out or if it was cabling.

Any suggestions would be great. If it does, then re-enable items one by one until you find the problem startup item. - If you're still having issues, it could be a problem with a Windows service. Sunday, June 17, 2012 2:40 AM Reply | Quote 0 Sign in to vote A friend of mine had the same problem. Boot into Windows Recovery Mode 2.

Mine was on 'compatibility'. worked for me, nothing else did... Yes it is a hardware issue when CLASSPNP.SYS is the offender. you can try this out To Start Windows 7 back in Normal Mode A) From step 2, look for the identifier (ex: {current}) for the OS description (ex: Windows 7) under aWindows Boot Loader section that

So I cannot do system restore.Safe mode works and I've tried to fix this problem for three days now.BIOS update no help.Safe mode works and I've tried to fix this problem You decide to install that same card in a newer computer, but maybe is it worn out or maybe a protocol or electrical standard has been slightly updated in recent times... SOLUTION: Just wait some extra time. I would try removing one piece of hardware at a time to narrow down where the problem is Sincerely, ThatRegularGuy117 I only had one 4GB stick of RAM in my laptop

In the image below you can see that the green progress bar, when the image is finished burning the bar will be filled. 6. https://www.bleepingcomputer.com/forums/t/537712/windows-7-hangs-when-loading-driver-classpnpsys/ I have not been able to try this myself yet.Also depending on your what OS you are using you could try and and get a hold of either the Vista or Your feedback helps to improve this site. It would never boot all the way, so I tried booting in safe mode, and I found out that it would stop at classnp.sys.

How to remove sata cable in hp laptop.....:??: Crawdaddy_DeluxeNov 10, 2014, 5:17 PM tttonyyy said: In my case getting stuck in \Windows\system32\drivers\CLASSPNP.SYS was caused by a badly connected SATA cable. http://cdhca.org/windows-7/windows-7-start-only-in-safe-mode-and-the-repair-option-is-missing.php I've had a client whose DVD drive was causing the system to hang. Its shows starting window when I select repair mode. I unhooked my second hdd (which was initially an external one) from the (i'm not sure how the cable is called but I believe ATA or SATA) and then boom..

You can reset the BIOS by clearing out the CMOS. When booting to safe mode, it's my understanding that it doesn't list a file on the screen until AFTER it has loaded sucessfully. At 2013-07-07 19:07:00, sachin left the following comment ...Hi, I am using Acer Aspre 5570z Laptop, my laptop getting hang during startup. check over here After that my 7 hangs "starting windows".

As a last resort, you can try using some spare parts if you have any and replace as much as you can: graphics card, sound card, hard drive, etc. Going to try to restart and see if it loads now.Any idea how I can get this working? Uninstalling the program will also disable any services associated with that program.

otherwise considering either completely installing the Xubuntu side by side for the time being and or if I have to reformat anyway..

Try to boot up now and see if you can get past the hanging screen. You would have to do the same procedure with the services if it's not a startup item causing the problem. When the user restarts the Microsoft Windows 7 operating system and presses F8, then chooses Safe Mode, the system may intermittently hang at Classpnp.sys. So the bad thing was that I never backed-up my data.

bcdedit /deletevalue {current} safeboot Sunday, September 27, 2015 3:19 PM Reply | Quote 0 Sign in to vote just enter BIOS and change sata drive mode to IDE. tried ALLLL of the above. My problem was concern the RAID+AHCI setting... this content HD Tune pro accuses it of having a very high spin number.

nothin worked. Exit and restart. Tuesday, April 12, 2011 6:47 PM Reply | Quote 9 Sign in to vote Try enter to BIOS and change the disk mode from AHCI to IDE, that works for me. Thanks for reading this barrubbaloOct 12, 2013, 2:06 PM Same problem...how to solve?

I am having exact same issue on my sons laptop and am not finding any answers anywhere. I disconnected my USB keyboard and rebooted... Also, the problem started after I installed SP1. :/ Proposed as answer by Mealit Saturday, August 03, 2013 1:58 AM Unproposed as answer by Mealit Saturday, August 03, 2013 1:58 AM Back to top #11 cbblake1 cbblake1 Topic Starter Members 34 posts OFFLINE Local time:02:08 PM Posted 22 June 2014 - 08:11 PM Update: We have success!

Specs: Toshiba Satellite S855 Intel i7 2.3GHz 6GB Ram AMD Radeon HD 7670M Friday, April 19, 2013 2:40 PM Reply | Quote 0 Sign in to vote sfc worked for me Help Desk Geek Search Menu Windows Windows 8 Windows 7 Windows Vista Windows XP Reviews Software Tools Products Tips How-To Help Desk MS Office Linux Other Networking Virtualization Databases Search site If I boot in safe mood, it just stuck or hang with classpnp.sys for life. Right click drive>properties>tools>and under error-checking>check now...